Drilling Detergent
Drilling Detergent is a specialized surfactant-based additive designed to improve the efficiency, cleanliness, and overall performance of water-based drilling fluids. It reduces surface tension, increases wetting action, enhances hole cleaning, and minimizes operational problems caused by formation clays, stuck pipe, or poor mud flow. Drilling Detergent is typically formulated using a blend of anionic, non-ionic, or amphoteric surfactants, wetting agents, and foam-controlled cleaning chemicals.
Send Inquiry 
Key Functions
- 1. Reduces Surface Tension
- Lowers the interfacial tension between drilling fluid and cuttings.
- Allows mud to penetrate and clean surfaces more effectively.
- 2. Improves Hole Cleaning
- Prevents mud balling on BHA, drill pipe, drill collars, and bit.
- Helps remove cuttings from the wellbore faster.
- 3. Reduces Differential Sticking
- Creates a lubricating film that minimizes sticking problems.
- Especially beneficial while drilling reactive shales or tight formations.
- 4. Prevents Bit Balling
- Keeps the drill bit clean and free from sticky shale accumulation.
- Improves penetration rate (ROP).
- 5. Enhances Mud Rheology
- Helps maintain proper fluid flow and reduces drag.
- Compatible with most water-based drilling systems.
Specification
| Parameters | Test Results |
|---|---|
| Physical state | Miscible with water |
| Density at 25 ‘C, gm/ml | 1.01 |
| Surface tension of 0.25% (v/v) solution of the sample in distilled water at 25 ‘C dynes/cm. | 28.0 |
| pH of 1% (v/v) solution of the sample in distilled water. | 10.0 Min. |
| Emulsion stability test 485 ml distilled water + 15 ml | |
| HSD + 1 ml sample Stir for 5 minutes | |
| a. Immediate separation of HSD Oil | Nil |
| b. Separation after 24 hrs At room temp | 1.7 ml |
| Mud Lubricity Coefficient | 0.18 |
| Foaming tendency test0.1% (v/v) solution of sample in Distilled water, stir for 10 minutes | 2.1 |
For more Information, Please Contact us..
Send Inquiry